DIE STEEL-Die Steel is a high carbon Alloy steel that achieves a high degree of hardness with compressive strength and abrasion resistance.The Die Steel is used as a standard material for dies and cutting elements..

DIE STEEL TYPES:

• D2/D3
• HDS (HOT DIE STEEL)
• DB6
• COLD DIE STEEL CATEGORY WISE DIVISION:
• D2-1.2601(KNL) , 1.2379(KMV)
• D3/HCHCR(HIGH CARBON HIGH CHROME)

• HOT DIE STEEL: H-13
• DB6/1.2714 DIE STEEL

 

HCHCR-D3 Steel Uses, Properties, Composition:

D3 is an excessive carbon chromium metal stated for its resistance to abrasion. D3 is hard, durable and dense, and is immune from sinking in use. It offers a measure of corrosion resistance while polished. In widespread.Owing to its higher put on resistance, D3 device metal is slightly greater difficult to grind than D2. Applications D3 is suitable for packages which includes complex blanking and forming gear for lengthy runs and for difficult and abrasive substances. It is typically used for other applications along with brick and tile mildew liners, master hobs for cold hobbing.

Basically utilized as cutting tools for sheets as much as four mm thickness, trimming dies, blanking dies for paper and plastics, shear reducing edges and rotational shear edges for sheet thicknesses up to 2 mm.

Chemical composition:

The following below table shows the chemical composition of D3-HCHCR steel:

Element	C	Si	Mn	P	S	Cr
Content (%)	2.00-2.35	0.60	0.60	0.03	0.03	11.00-13.50

Equivalent grades of Die Steel D3-HCHCR :

AFNOR Z 200 C 12	DIN 1.2080	UNS T30403	UNI X 21O Cr 13 KU	B.S. BD 3
ASTM A681	SAE J437	SAE J438	JIS SKD1	FED QQ-T-570

Hardness:

Hardness within the variety 58-64 HRC:

Heat Treatment:

Heat remedy temperatures, which include price of heating, cooling and soaking instances will vary because of elements including the form and length of each steel issue. Other considerations for the duration of the heat remedy manner encompass the form of furnace, quenching medium and work piece transfer centers.

Die Steel D3-HCHCR uses:

Highly stressed cutting

Punching tools for thin sheets,

Shear blades for cutting

Profile rolls,

Drawing and deep drawing tools,

Stone processing tools,

Knives for paper and plastics,

Shear knives for thin sheets.

Deep drawing,

Pressure pads

Highly wear-resistant plastic moulds.

 

TYPES OF OTHER GRADES AVAILABLE :

C45, EN8, EN9, EN19, EN24, EN31,EN36C, EN41B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13,M2, M35, M42, M48,1.2714, SKD-11, P20, P20+S, P20+Ni, P20+Ni+HH, SAE 4140, SAE4340, SAE 8620, 16MNCR5, 20MNCR5, C35, C40, C50, C60, CK45, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C,S355J2G3.

D3 Steel(HCHCR)-We Supply on Pan india:

Uttar Pradesh:

Kanpur,Lucknow,Ghaziabad,Agra,Meerut,Varanasi,Prayagraj,Bareilly,Aligarh,Moradabad,Saharanpur,Gorakhpur,Noida, greater Noida, udham  nagar,Firozabad,Jhansi,Muzaffarnagar,Mathura,Ayodhya,Rampur,Shahjahanpur,FarrukhabadFategarh,Budaun,Maunath,Bhanjan,Hapur,Etawah,Mirzapur,Vindhyachal,Bulandshahr,Sambhal,Amroha,Hardoi,Fatehpur,Raebareli,Orai,Sitapur,Bahraich,Modinagar,Unnao,Jaunpur,Lakhimpur,Hathras,Banda,Pilibhit,Barabanki,Khurja,Gonda,Mainpuri,Lalitpur,Etah,Deoria,Badaun,Ghazipur,Sultanpur,Azamgarh,Bijnor,Sahaswan,Basti,Chandausi,Akbarpur,Ballia,Tanda,Shikohabad,Shamli,Awagarh,Kasganj.

Rajasthan:

Jaipur, Jodhpur, Kota ,Bikaner ,Bhiwadi  ,Ajmer ,Udaipur ,Bhilwara ,Alwar ,Bharatpur,bharan ,Sri Ganganagar ,Sikar ,Pali ,Tonk ,Kishangarh ,Beawar ,Hanumangarh ,Dhaulpur ,Gangapur City, Sawai Madhopur ,Churu ,Jhunjhunu ,Baran ,Chittaurgarh ,Makrana ,Nagaur ,Banswara ,Dungarpur, pratapgarh

Haryana:

Faridabad (New Township) ,Gurgaon , Panipat, Yamunanagar, Rohtak, Hisar, Karnal, Sonipat, Panchkula (Urban Estate), Ambala Sadar, Bhiwani, Ambala, Sirsa, Bahadurgarh, Jind, Thanesar, Kaithal, Rewari, Palwal, Hansi, Narnaul, Fatehabad, Gohana, Tohana, Narwana.