C45 Carbon Steel Sheet Supplier in Delhi

C45 Carbon Steel Sheet Supplier in Delhi: C45 carbon steel sheet is very similar to C45 carbon steel plate, it’s a medium carbon steel known for its high strength and excellent machinability, and marvelous weldability, making it a popular choice for the manufacture of elements that require a balance between strength and moldable.

What is the chemical composition of C45 carbon steel sheet?

The chemical composition of C45 carbon steel is a key factor that conditions its mechanical properties and relevance for many applications. The chemical composition of C45 carbon steel sheet is as follows:

• Carbon (C): 0.42 – 0.50%
• Silicon (Si): 0.10 – 0.40%
• Manganese (Mn): 0.50 – 0.80%
• Sulphur (S): ≤ 0.045%
• Phosphorus (P): ≤ 0.045%

Carbon (C)

C45 steel has a carbon content of 420 to 500 parts per million (ppm). This relatively high carbon content is supervised for the steel’s high strength and hardness. However, it also reduces the steel’s ductility and toughness. The carbon atoms give the necessary solidify effect when the steel is heat-treated, which is beneficial for elements that need to withstand high stress and wear.

Silicon (Si)

Silicon is present in C45 steel in the range of 0.10% to 0.40%. Silicon acts as a deoxidizer throughout steel-making, which means it helps eliminate oxygen from the molten steel. This process improves the overall quality of the steel by reducing dirrtiness. This increase the steel’s strength and toughness. Moreover, silicon makes better the steel’s magnetic properties and enhances its resistance to corrosion and oxidation.

Manganese (Mn)

Manganese content in C45 steel is between 0.50% and 0.80%. Manganese is an important alloying element that contributes to the steel’s hardness and strength. It also boost the steel’s wear resistance and tensile strength. Manganese serves as a deoxidizer, aiding in the removal of sulfur and oxygen impurities from steel.

Sulphur (S)

The sulfur content is capped at 0.045%. Steel standards impose a maximum sulfur limit of 0.045% to maintain material integrity. While sulfur can improve machinability, it generally decreases ductility and toughness. In high concentrations, sulfur can cause the steel to become brittle, which is unpleasant for most applications. Therefore, its content is kept low in C45 steel to maintain a balance between machinability and mechanical properties.

Phosphorus (P)

Phosphorus, like sulfur, is also considered an impurity and its content is limited to a maximum of 0.045%. Phosphorus can increase the strength and hardness of steel, but it can also make the steel brittle, especially at lower temperatures. Therefore, controlling the phosphorus content is crucial to ensure the steel’s overall quality and presentation.

What are the mechanical properties of C45 carbon steel sheet?

The specific chemical composition of C45 carbon steel imparts several advantageous mechanical properties:

• Tensile Strength: The tensile The tensile strength of C45 steel usually falls between 570 and 700 MPa.
• Yield Strength: The yield strength is about 330 to 460 MPa, specify the stress at which the steel will deform permanently.
• Hardness: The Brinell hardness of C45 steel is approximately 170 to 210 HB in the normalized condition. Heat treatment processes can further increase the hardness, making it acceptable for wear-resistant applications.
• Elongation: C45 steel has an elongation of around 16%, which is a measure of its ductility and ability to withstand plastic deformation before fracturing.

What are the common applications of C45 carbon steel sheet?

The balanced between chemical composition and mechanical properties of C45 carbon steel make it acceptable for a wide range of applications. Some common uses include:

Manufacturing of Machine Parts

C45 steel is widely used in the manufacturing of machine parts such as gears, shafts, axles, and bolts. The high tensile strength and hardness make it ideal for components that must withstand heavy loads and stresses.

Automotive Industry

In the automotive industry, C45 steel is used to manufacture many elements such as crankshafts, connecting rods, and drive shafts. The steel’s high strength and toughness ensure that these parts can endure the high stresses and strains encountered during vehicle operation.

Construction and Engineering

C45 steel is also used in the construction and engineering sectors for making tools, knives, and other constructional elements. Its ability to be heat-treated to various hardness levels allows it to be tailored for specific applications, increasing its versatility.

Agricultural Equipment

The agricultural industry uses C45 steel for manufacturing tools and appliances that require high strength and wear resistance. This includes plowshares, blades, and other components that are exposed to abrasive environments.

List of C45 Carbon Steel Sheet

Alloycarbonsteel offers a wide range of premium raw iron materials, including Plastic Mould Steel, Carbon Steel, Die Steel, High Speed Steel, and Alloy Carbon Steel, serve to various industrial needs. Located in Mundka, Delhi, 110041, the company specializes in providing top-quality materials essential for manufacturing and engineering applications. Their large inventory ensures that clients have access to the best materials required for producing durable and reliable products, making Alloycarbonsteel a trusted source for high-grade steel and iron supplies in the region.

For further information:

Company Name – Alloycarbonsteel

Contact No.     –   8076217931

Mail I’d    – sumit_garg_1@yahoo.co.in

Location      –   Alloy Carbon Steel Office Address, 693 Saini Vihar, Mundka, Delhi 110041

Website    – Alloycarbonsteel.com